The first thing you need is a paper box.
The best way to make paper is to cut a rectangle from the bottom of a plastic bag and then cut two sheets of plastic.
It is then easiest to shape a sheet of plastic using a sharp knife and the two sheets.
You will need some kind of glue for the paper to adhere to the plastic.
If you don’t have glue then you can use a plastic wrapping paper to make the paper.
You can also buy a paper template for this purpose.
You should make your paper in the following steps: First, you need to make a rectangle of paper.
To make a rectangular piece of paper you need a rectangular cutout.
To cut the rectangle into a rectangle, you can fold the plastic paper over the cutout and then use a flat edge knife to cut the plastic into a rectangular shape.
Now cut two additional sheets of paper to cover the cutouts.
Cut the paper template into a circle.
You need to fold the paper into a sheet.
Now you can make a second sheet of paper using a piece of cardboard.
Next, you must use a sharp, straight edge knife and fold the sheet of cardboard to form a rectangle.
To shape the paper, you will need a pencil or a marker.
Next use the sharp edge of a knife to form two sheets with the sharp corners aligned with the corners of the rectangle.
Next fold the two sides together.
Fold the paper up one more time, then place the paper on a flat surface and make a circle with the scissors.
Now fold the folded paper into the paper templates.
To form the paper you will now need a piece, about 6 by 7 inches, of paper, folded.
You are now ready to cut.
To do this, cut a circular strip of paper and fold it to a circle about 3 inches in diameter.
Place the folded piece on a plastic sheet and fold over.
Place a piece on top of the folded sheet and cut a corner to make an indentation on the paper in between the two folds.
Next cut another circular strip about 3 by 3 inches and fold one corner of the paper at an angle to form an indent on the folded section of paper in front of the two foldings.
Cut a triangular piece of the first sheet of folded paper and place it on top.
Fold a corner of it in the same way as the folding one, and cut another triangular piece.
You now have a triangular sheet.
You want to fold another triangular strip of the second sheet and place that on top, then fold over to form another indentation, and so on.
You might have to cut two strips to form the indentation.
The paper should be well and neatly folded and placed on a smooth surface.
Now it is time to cut out a piece with the paper and glue it.
You do this by carefully cutting the paper around the edge and then sticking the paper onto the glue stick.
Use a pencil to make small holes in the paper so that the glue sticks to the paper inside.
The glue will stick to the glue and keep the paper from falling off.
You also need to place the glue in a small hole in the middle of the sheet.
Make sure that there are no sharp edges or corners on the edges.
Make the paper as thin as possible so that it does not stick to your fingers.
Cut off a piece at the end of the glue.
Now, you should make a square with the glue, and glue the paper with another piece of glue.
Place your paper square in the glue as well.
You then need to carefully fold the piece of glued paper over it and make an oval shape with the tapered ends.
Put the paper square back on the glue again and fold down one corner to form that same oval shape.
Make a triangle and glue that same paper square again.
Now glue two strips of paper together to form three squares.
Then fold the edges together and glue them together.
Now put the glue on one corner and glue a strip of glue on the other corner.
You have now a triangle with glue.
To glue two triangles together, glue one of the triangles to the other side of the other triangle.
You get the idea.
Now use the glue to make another triangle and place the tape-wrapped paper square on top so that you have a triangle of the same size.
You don’t want the glue sticking to the edges of the taped paper.
Now place the two triangles on top to form four triangles.
Make an indent around the edges and glue all four triangles to each other with glue sticks.
Now attach the paper squares together using glue sticks, tape and glue.
Make it as thin and as flexible as possible.
You may need to glue more paper than the glue is able to hold.
The next step is to attach the folded and glued paper squares to eachother.
Place them on the plastic sheet, and make sure that the paper sides are straight and that the glued paper is at the same height as the paper underneath